8 System Setup
DX100 8.15 Numeric Key Customize Function
8-106
4. Input the name of the reserved window and press [ENTER].
– The reserved name input to the “ALLOCATION CONTENT” is
shown.
5. Open the window for allocation.
6. Press [INTERLOCK] and the allocated key at the same time.
– A message “Reserved display registered” appears, and the window
is registered.
– In this case, the CURRENT POSITION window is registered by
pressing [INTERLOCK] + [0] with the CURRENT POSITION window
displayed on the screen.
To Next Page
Loading...
