8 System Setup
DX100 8.3 Tool Data Setting
8-19
– The sub menu appears.
2. Select {TOOL}.
(1) Move the cursor to the number of the desired tool, and press
{SELECT} in the tool list window.
(2) The tool coordinate window of the selected number appears.
– In the tool coordinate window, the tool number can be changed by
pressing the page key or selecting {PAGE} .
– To switch the tool list window and the tool coordinate window, press
{DISPLAY} {LIST} or {DISPLAY} {COORDINATE DATA}.
3. Select the desired tool number.
4. Place the cursor in the part to register the desired coordinate data
and press [SELECT].
– The number is ready to input.
5. Input the coordinate data.
6. Press [ENTER].
To Next Page
Loading...
