13-15
IM DLM6054-01EN
Saving and Loading Data
13
13.8 Loading Setup Data
CAUTION
Do not remove the storage medium or turn off the power when the file icon ( ) in the bottom
left of the screen is blinking. Doing so may damage the storage medium and corrupt its data.
Procedure
FILE Setup (Load) Menu
Press FILE and then the Setup(Load) soft key to display the following menu.
Set which files to display in the File
List window (*.set, *.*).
Updates the File List with the most
recent information
Loads the setup data
Set the folder to load from.
Move the cursor to a folder by using the
jog shuttle or the SET key (by moving it
up, down, left, or right), and press SET.
To move to the folder that contains the current folder, move the cursor to this line and press SET.
Move the cursor to the file that you want to
load by using the jog shuttle or the SET key
(by moving it up, down, left, or right).
Explanation
You can load setup data that has been saved to a storage medium.
To Next Page
Loading...
Need help?
General
