YOKOGAWA DL6000 Series

9-1
IM DLM6054-01EN
Computed and Reference Waveforms
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Index
App
9.1 Setting the Computation Mode
Procedure
MATH/REF Menu
Press MATH/REF to display the following menu.
Set the trace number (M1–M4).
Set the computation mode (OFF, Math, Ref).
Explanation
The DL6000/DLM6000 can display up to four computed and reference waveforms.
Trace Number (Setup Trace)
You can select one of the four traces (M1 to M4) used for displaying computed and reference
waveforms.
Computation Mode (Mode)
You can specify the computation mode for the selected trace number.
OFF: The trace will not display any waveforms.
Math: The trace will display a computed waveform.
Ref: The trace will display a reference waveform (see section 9.8).
Chapter 9 Computed and Reference Waveforms