To Next Page

To Previous Page

3-16

IM DLM6054-01EN

3.7 Setting the Date and Time

Procedure

UTILITY System Configuration Menu

Press UTILITY, the System Configuration soft key, and then the Date/Time soft key to display the

following menu.

Turns the date and time display on and off

Set the date (set the year, month, and day using the jog shuttle).

Set the time (set the hour, minute, and second using the jog shuttle).

Set the time difference from GMT.

Applies the settings

Explanation

Date and Time

Date (Year/Month/Day)

Enter the year using four digits.

Time (Hour/Minute/Second)

Set the hour using a 24-hour clock.

Time Difference from GMT

Set the time difference from GMT according to the region where you are using the DL6000/DLM6000.

Set the time difference properly so that the following functions work properly.

• Mail transmission using the SMTP

function (see section 14.4)

• Monitoring of the DL6000/DLM6000 using the Web server function (see section 14.7)

* GMT information can be obtained from an SNTP server (see section 14.5).

Time Difference from GMT

Set the time difference from –12 hours 00 minutes to 13 hours 00 minutes.

For example, set Time Hour to 9 and Minute to 00 for Japan standard time.

Checking the Standard Time

You can check the standard time for your region in the following ways.

• Check the Date, Time, Language, Regional Options on your Windows PC.

• Check the following website. http://www.worldtimeserver.com/

Note

• The DL6000/DLM6000 does not support Daylight Savings time. Adjust the time difference from GMT to

obtain the same effect.

• The date and time settings are backed up with the internal Lithium battery. The settings remain even if

you turn the DL6000/DLM6000 off.

• The DL6000/DLM6000 manages leap years.

YOKOGAWA DL6000 Series User Manual

Questions and Answers: