Making Preparations for Measurements
3-7
IM DLM6054-01EN
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Index
App
Turning On the Power Switch
Items to Be Checked before Turning On the Power
• The instrument is properly installed.: “3.2 Installing the Instrument”
• The power cord is properly connected.: Previous page
Turning On the Main Power Switch
1.
Switch the rear panel power switch to the on ( | ) position.
Turning On the Power Switch
2.
Press the power switch on the front panel.
OFF ON
Powering off
CAUTION
Abruptly turning the main power switch off or unplugging the power cord while saving data or
printing with the built-in printer, may damage the built-in printer or corrupt the media (PC card,
internal hard disk, USB storage, and so on) on which data is being saved. The data being
saved is also not guaranteed. Always complete data saving before turning off the main power
switch.
Turning the Power Switch Off
1.
Press the power switch on the front panel.
Turning the Main Power Switch Off
2.
Check that the DL6000/DLM6000 internal fan has stopped, and that the screen is blank, then switch
the power switch on the rear panel to the off (O) position.
3.3 Connecting the Power
To Next Page
Loading...
Need help?
General
