2-48
IM DLM4038-02EN
Setting the Data Pattern
You can enter up to 4 characters.
• You can switch between uppercase and lowercase to enter alphabet characters. However,
case is distinguished only when the Case Sensitive check box is selected.
• The special characters CR, LF, SP, and NUL are shown in single quotation marks. These
special characters are counted as one character including the single quotation marks.
Examples: AB’CR’D (four characters), XY’SP’ (three characters), P’NUL’WU (four characters)
• The case of the entered alphabet letters is retained even if the input format is changed to Bin
or Hex. It is also retained when the format is changed from Bin or Hex to ASCII.
• If a character code that does not exist on the keyboard is entered when the input format is
Bin or Hex and then the input format is changed to ASCII, a white square is displayed in the
corresponding position.
2.15 Triggering on UART Signals (Option)
To Next Page
Loading...
