2-52
IM DL950-02EN
Configuring the Display (Display)
2.
Tap Display, or press the soft key. The following screen appears.
For details on the settings, see the explanation of the measurement items in section 2.1 and
later.
3.
Tap the items of each channel. Use the displayed list (options) or input box to set the items.
Scope Mode
Vertical scale
Turns waveform input on for all channels
Turns waveform input off for all channels
Turns the waveform input on or off
Display label
Offset
Vertical position
Sample rate
Set the zoom magnification.
Scroll to display channels
that do not fit in the screen.
Recorder Mode
Turns waveform input on for all channels
Turns waveform input off for all channels
Turns the waveform input on or off
Display label
Upper and lower limits of the display range
Sample interval
Scroll to display channels
that do not fit in the screen.
2.12 Displaying the All Channel Setup Menu
To Next Page
Loading...
