CELL-DYN
®
3/35 Sample Loader TS Guide 9140234B-June 1997
Search
Book TOC
Go Back
28 Oct
1997 20:44
HAZARDS
v
Electrical Shock Hazard
WARNING: Electrical Shock Hazard. Basic electrical hazard awareness is essential to the safe
operation of any electrical device. Personnel must practice good habits of electrical safety such as the
following:
• Periodically inspect electrical cabling into and on the system for signs of wear or damage.
• Do not disconnect any electrical connection while the power is on.
• In the event of a blown fuse or thrown circuit breaker, determine and correct the cause before
attempting to resume operation of the equipment.
• Keep liquids away from all connectors of electrical or communication components.
• Keep the floor and countertop dry and clean under and around the system.
Laser Hazard
DANGER: Class 3B Laser System. Avoid direct exposure to beam. Wear approved laser eye
protection and observe procedural controls.
Electrostatic Discharge
Many of the electronic components on the CELL-DYN circuit boards are susceptible to electrostatic
discharge (ESD). To prevent ESD damage, follow these guidelines:
1. Place the static protective work mat on a solid surface close to the instrument. Allow the ground
strap to reach the instrument.
2. Attach the ground clip to the instrument chassis.
To Next Page
Loading...
