ADCMT 6241A User Manual

6241A/6242 DC Voltage Current Source/Monitor Operation Manual
5.2.4 Source Function
5-22
5.2.4 Source Function
This section describes restrictions on the source function and operations.
5.2.4.1 Source Mode, Source Function, and Setting Parameters
The following shows relationships between the setting parameters related to source.
1. For DC or Pulse source, Vs and Is parameters can be changed regardless of the functions currently set.
2. For DC Sweep or pulse sweep source, only function parameters currently set are changeable.
Pulse source
DC source
Pulse source
DC source
Pulse sweep source
DC sweep source
Pulse sweep source
DC sweep source
Linear Sweep
Fixed Sweep
Random Sweep
Voltage random
source value
(8000 data)
Current random
source value
(8000 data)
Current pulse sweep base valueVoltage pulse sweep base value
Voltage stop address
Voltage start address
Number of times for Voltage sampling
Voltage level value
Voltage step value
Voltage stop value Current stop value
Current step value
Current level value
Number of times for current sampling
Current start address
Current stop address
Current start value
Current bias value
Voltage HI limiter value (*2)
Voltage HI limiter value (*2)Current HI limiter value (*1)
Current HI limiter value (*1)
Voltage bias value
Voltage start value
Voltage pulse base value Current pulse base value
Current-source value
Voltage HI limiter value (*2)
Voltage HI limiter value (*2)
Current HI limiter value (*1)
Current HI limiter value (*1)
Voltage-source value
(*1) (*2): Shared by DC, Pulse, DC sweep , and Pulse sweep.
Two Slope Linear Sweep
Current last valueVoltage last value
Current step1 valueVoltage step1 value
Current first valueVoltage first value
Current middle valueVoltage middle value
Current step2 valueVoltage step2 value

ADCMT 6241A Specifications

General

Brand	ADCMT
Model	6241A
Category	Monitor
Language	English