ADCMT 6241A - Functions in Detail; DC Source Mode Operation

6241A/6242 DC Voltage Current Source/Monitor Operation Manual
5.2 Functions in Detail
5-8
5.2 Functions in Detail
5.2.1 DC Source Mode Operation
Table 5-2 below shows DC source mode operation.
Table 5-2 DC Source Mode Operation (1/2)
Operational
condition
Trigger mode Explanation Operation Remarks
Operate
ON
AUTO
Executes consec-
utive measure-
ment with the set
period time Tp.
Tp: Period Time
Td: Measurement
Delay Time
Tm: Measurement Time
(Integration time +
Measurement data
processing time)
Tcn: Operation Processing Time
HOLD
Executes mea-
surement after
trigger input.
Source value
changed
AUTO
Changing source
value does not
induce changing
range.
HOLD
Standby status
COMPLETE OUT [FRONT]
COMPLETE OUT [END]
COMPLETE OUT [HI/GO/LO]
Operate
Tcn
Tp
Td
Tp
Tm Td Tm
Tcn
Td Tm
Standby status
Operate
Measurement
trigger
COMPLETE OUT [FRONT]
COMPLETE OUT [END]
COMPLETE OUT [HI/GO/LO]
TRIGGER IN
Tp
Tp
Source value
changed
COMPLETE OUT [FRONT]
COMPLETE OUT [END]
COMPLETE OUT [HI/GO/LO]
Tp
Td Tm
Td
Tm
Previous value
Td
Tm
Previous value
Source value
changed
TRIGGER IN
COMPLETE OUT [END]
COMPLETE OUT [HI/GO/LO]
COMPLETE OUT [FRONT]
Tp
Measurement
trigger