ADCMT 6241A - Compatibility with 6243;44; Remote Command Compatibility; Difference of Period-Parameters in Pulse Source Mode and Sweep Source Mode

6241A/6242 DC Voltage Current Source/Monitor Operation Manual
5.3 Compatibility with 6243/44
5-69
5.3 Compatibility with 6243/44
The 6241A/6242 shares the same command system as the 6240A.
This section describes the compatibility with the earlier 6243/44 models.
5.3.1 Remote Command Compatibility
The 6241A/6242 has the same function as the 6243/44 function but does not have command compatibility.
For more information on the remote operation, refer to Section 6.7.3, “Remote Command List.”
The following commands have compatibility.
• V command
• I command
• D command
• H command
• E command
• N command
5.3.2 Difference of Period-Parameters in Pulse Source Mode and Sweep Source Mode
Note that the definition of the period parameter Tp is different from that of the 6243/44.
Source mode 6240A/6241A/6242 6243/44
Pulse
DC Sweep
Pulse Sweep
Tp
Tds
Tp
Tds
Tp
Tds
Tp
Tds
Tp
Tds
Tp
Tds