6241A/6242 DC Voltage Current Source/Monitor Operation Manual
1.6 Cleaning, Storage, and Transport Methods
1-12
1.6 Cleaning, Storage, and Transport Methods
1.6.1 Cleaning
Clean the 6241A/6242 by wiping or brushing its surface with a soft cloth or cloth which has been damp-
ened in water containing a mild detergent.
CAUTION:
1. Ensure that water does not penetrate the 6241A/6242 (wring out the cloth so it is damp and not saturated).
2. Avoid using organic solvents such as benzene, toluene, xylene, acetone, etc. They will cause deformation of
the plastic parts.
1.6.2 Storage
Store the 6241A/6242 in a location where the temperature is within the range of -25ºC to +70ºC. If storing
for an extended period (90 days or longer), place the 6241A/6242 in a moisture-proof bag together with a
desiccant. Avoid storing the 6241A/6242 in a location where there is a lot of dust or where it will be sub-
jected to direct sunlight.
1.6.3 Transport
To transport the 6241A/6242, use the original box that it came in. If the box is not available any longer,
pack the 6241A/6242 in accordance with the following guidelines.
Packing procedure
1. Prepare a corrugated cardboard box with dimensions that are larger than the
external dimensions of the 6241A/6242 by 15 cm or more to allow for shock
absorbent material.
2. Wrap the 6241A/6242 with a protective sheet.
3. Line the box with shock absorbing material so that the 6241A/6242 is protected
on all sides by cushioning material.
4. Close the box with industrial staples or use packing tape.
When sending the 6241A/6242 to an ADC CORPORATION sales representative for service or repairs,
attach a label stating the following items.
• Company name and address
• Name of the person in charge
• Serial number (shown on the rear panel)
• Type of service required
To Next Page
Loading...
General