12
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\cdma2000_titlepage.fm
DECLARATION OF CONFORMITY
According to ISO/IEC Guide 22 and CEN/CENELEC EN45014
Manufacturer’s Name: Agilent Technologies, Inc.
Manufacturer’s Address:
24001 E. Mission Avenue
Liberty Lake
Washington
99019-9599
USA
Declares, that the product
Product Name:
8960 Series 10 Wireless Communications Test Set
Model Number: E5515T
Product Options: This declaration covers all options of the above product.
Conforms with the following European Directives:
The product herewith compiles with the requirements of the Low Voltage Directive 72/23/EEC and the
EMC Directive 89/336/EFC (including 93/68/EFC) and carries the CE Marking accordingly.
EMC Standard
IEC 61326-1:1997+A1:1998/EN
61326-1:1997+A1:1998
CISPR 11:1990 / EN 55011:1991
IEC 61000-4-2:1995+A1:1998 / EN
61000-4-2:1995
IEC 61000-4-3:1995 / EN 61000-4-3:1995
IEC 61000-4-4:1995 / EN 61000-4-4:1995
IEC 61000-4-5:1995 / EN 61000-4-5:1995
IEC 61000-4-6:1996 / EN 61000-4-6:1996
IEC 61000-4-11:1994 / EN
61000-4-11:1994
Limit
Group 1 Class A
[1]
4kV CD, 8kV AD
3 V/m, 80-1000 MHz
0.5V signal lines, 1kV power lines
0.5 kV line-line, 1 kV line-ground
3V, 0.15-80 MHz
1 cycle, 100%
Safety:
IEC 61010-1:1990+A1:1992+A2:1995 / EN 61010-1:1993+A2:1995
Canada CSA C22.2 No. 1010.1:1992
Supplemental Information:
[1]
The product was tested in a typical configuration with Agilent Technologies test systems
14 December 2000
W.V.Roland / Reliability & Regulatory
Engineering Manager
For further information, please contact your local Agilent Technologies sales office, agent, or distributor.
Authorized EU-representative: Agilent Technologies Deutschland GmbH, Herrenberger StraBe 130, D71034 Boblingen, Germany