90
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_gen_bse_avctest.fm
AVC Test Operating Mode
You can also make analog transmit power and frequency stability measurements on the mobile’s reverse
channel carrier. If you modulate your mobile’s carrier, you can measure the frequency modulation
characteristics. See “Analog Transmit Power Measurement Description” on page 37, “Frequency Stability
Measurement Description” on page 57, and “Frequency Modulation (FM) Measurement Description” on page
55.
Related Topics
“Programming: Getting Started Guide for cdma2000 Mobile Test” on page 1
“Receiver Control” on page 194
To Next Page
Loading...
Need help?
General
