Agilent Technologies 8960 Series Reference Guide

678
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_gen_op_overview_man_measurements.fm
cdma2000 Measurement Procedures
Measuring Frame Error Rate (FER)
1. Press the Measurement selection key.
2. Select the Frame Error Rate measurement.
3. Press the Frame Error Rate Setup (
F1) key. A typical display is shown below.
4. Set up the measurement parameters as needed for your measurement situation.

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English