Agilent Technologies 8960 Series Reference Guide

656
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_gen_op_overview_make_meas.fm
How Do I Make Measurements on a Mobile Station?
How Do I Make Measurements on a Mobile Station?
A. Establish a call.
1. Connect the mobile station to the Test Set.
2. Make a call (see “How Do I Set Up a Call?” on page 660).
B. Select measurements.
1. Press the Measurement selection key.
2. Highlight a measurement and press the knob.
3. Repeat steps 1 and 2 to select additional measurements.
For a complete list of measurement procedures, see “cdma2000 Measurement Procedures” on page 672
2
1
The gray boxes indicate
that the measurement is
being made, but the results
are not being displayed.
These black boxes indicate
that access probe power
measurement results are
being displayed in the lower
measurement window, and
channel power results are
being displayed in the upper
measurement window.

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English