265
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_description.fm
CALL Subsystem
CALL Subsystem
Description
The CALL subsystem handles all setup, control, and query functions for call processing. This includes mobile
station (MS) and Base Station (cell) functions.
Syntax Diagrams and Command Descriptions
“CALL:ACC” on page 267 “CALL:OCNSource” on page 337
“CALL[:CELL]:APARameter” on page 268 “CALL[:CELL]:OPERating” on page 340
“CALL:AVCTest” on page 272 “CALL:ORIGinate” on page 341
“CALL:AWGNoise:POWer” on page 273 “CALL:PAGing” on page 343
“CALL:BAND” on page 277 “CALL:PILot” on page 348
“CALL:CHANnel” on page 278 “CALL[:CELL]:PNOFfset” on page 350
“CALL[:CELL]:CLPControl” on page 280 “CALL[:CELL]:POWer” on page 351
“CALL:CONNected[:STATe]” on page 282 “CALL[:CELL]:PROTocol” on page 355
“CALL[:CELL]:CONTrol:DOWNlink:FREQuency:AUTO” on
page 286
“CALL:QPCHannel” on page 357
“CALL:D2KTest” on page 287 “CALL[:CELL]:RCONfig” on page 361
“CALL:DCONnected[:STATe]” on page 289 “CALL:REGister” on page 362
“CALL:END” on page 292 “CALL[:CELL]:RFGenerator” on page 365
“CALL[:CELL]:ESCape[:MODE]” on page 293 “CALL:[:CELL]:RLGain” on page 366
“CALL:FCHannel” on page 294 “CALL:SCHannel” on page 367
“CALL:FM” on page 298 “CALL:SETup:AVC” on page 372
“CALL:HANDoff” on page 302 “CALL:SETup:BAND” on page 374
“CALL[:CELL]:MCCode” on page 303 “CALL:SETup:CHANnel” on page 375
“CALL[:CELL]:MNCode” on page 304 “CALL:SETup:HANDoff” on page 377
“CALL:MS:ANALog” on page 305 “CALL:SETup:MS:ANALog” on page 378
“CALL:MS:REPorted:<BCL,BWT>” on page 306 “CALL:SETup:SYSTem” on page 380
“CALL:MS:REPorted:CAPability:CCHannel:DEDicated” on
page 307
“CALL[:CELL]:SIDentity” on page 381
“CALL:MS:REPorted:CAPability:FCHannel” on page 309 “CALL[:CELL]:SOPTION” on page 382
“CALL:MS:REPorted:CAPability:QUERy” on page 311 “CALL:STATus” on page 384
To Next Page
Loading...
Need help?
General
