277
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_band.fm
CALL:BAND
CALL:BAND
“Diagram Conventions” on page 248
CALL:BAND:[:SELected]
Function Sets/queries a frequency band for the system type specified by the command’s system type
parameter.
The optional [:SELected] keyword in this command specifies that the frequency band being
set/queried applies to the current system type.
Setting Range: CCELlular (China Cellular)|IMT2000|JCDMa (Japan CDMA)|KPCS (Korean
PCS)|USCellular (U.S. Cellular)|USPCs (U.S PCS)|NMT450
Query Range: CCEL (China Cellular)IMT2000|JCDMa (Japan CDMA)|KPCS (Korean
PCS)|USCellular (U.S. Cellular)|USPCs (U.S PCS)|NMT450
*RST Setting U. S. PCS
Programming Example
OUTPUT 714;"CALL:BAND KPCS" !Selects the Korean PCS cell band.
:BAND
CALL
<sp>CCELlular|IMT2000*|JCDMa|KPCS|
[:SELected]
? (returns CCEL|IMT2000*|JCDM|KPCS|USC|
:DIGital2000
USCellular|USPCs|NMT450)
USPC|NMT450)
:DIGital95
* Does not apply to DIGital95
To Next Page
Loading...
