595
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_status_preset.fm
STATus:PRESet
STATus:PRESet
“Diagram Conventions” on page 248
STATus:PRESet
Function Presets the status subsystem.
Presetting the status subsystem performs the following functions:
• All enable registers are set to 0 (not enabled)
• All Positive Transition Registers (PTR’s) are set to 1 (positive transitions enabled).
• All Negative Transition Registers (NTR’s) are set to 0 (negative transitions disabled).
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
STATus :PRESet
To Next Page
Loading...
