Agilent Technologies 8960 Series

554
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_setup_hwquality.fm
SETup:HWQuality
SETup:HWQuality
“Diagram Conventions” on page 248
SETup:HWQuality:TIMeout[:STIMe]
SETup:HWQuality:TIMeout:STATe
Function Sets the handoff waveform quality measurement’s timeout value, and sets the waveform quality
measurement’s timeout state to 1 (on).
The query form returns the waveform quality measurement’s timeout value.
Setting Range: 1 to 999 seconds
Resolution: 1 second
Query Range: 1 to 999
*RST Setting 10 seconds, on
Programming Example
OUTPUT 714;"SETUP:HWQUALITY:TIMEOUT:STIME 5 S"
!Sets timeout state to ON and sets the timeout time to 5 seconds.
Function Sets/queries the handoff waveform quality measurement’s timeout state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Programming Example
OUTPUT 714;"SETUP:HWQUALITY:TIMEOUT:STATE ON"
SETup :HWQuality
:TIMeout
[:STIMe]
? (returns num value)
:TIME
? (returns num value)
:STATe
<sp>1|ON|0|OFF
Complex Command
? (returns 1|0)
<sp><num value>[S|MS|US|NS]
<sp><num value>[S|MS|US|NS]