Agilent Technologies 8960 Series Reference Guide

97
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_gen_bse_pich.fm
Configuring the F-Pilot Channel (Forward PICH)
Configuring the F-Pilot Channel (Forward PICH)
The F-Pilot parameters are configured using the following call processing subsystem functions and commands.
Settable F-Pilot Parameters
• F-Pilot level.
• F-Pilot state.
• PN Offset
Fixed F-Pilot Parameters
• F-Pilot Walsh code is fixed at code channel number 0.
GPIB Examples:
Setting the F-Pilot Level
OUTPUT 714;"CALL:PIL -8 DB"
would set the F-Pilot state on and set the level to −8 dB. See “CALL:PILOT[:SLEVel][:SELected]” .
Querying the F-Pilot Level
OUTPUT 714;"CALL:PIL:LEVel?"
would query the last setting that was made to the F-Pilot level. See “CALL:PILOT:LEVel[:SELected]” .
Operating Considerations
The Walsh code number for the F-Pilot channel is fixed at code 0 of the Walsh 64 set.
Related Topics
“CALL:PILot”
“How Do I Change Code Channel Levels?”

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English