Agilent Technologies 8960 Series

647
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_system_meas_reset.fm
SYSTem:MEASurement:RESet
SYSTem:MEASurement:RESet
“Diagram Conventions” on page 248
SYSTem:MEASurement:RESet
Function Aborts all measurements. If continuous triggering is enabled, measurements will begin a
new measurement cycle.
Setting Measurement results are set to their default values when measurement reset occurs.
SYSTem
:RESet:MEASurement