302
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_handoff.fm
CALL:HANDoff
CALL:HANDoff
“Diagram Conventions” on page 248
CALL:HANDoff[:IMMediate]
Function Initiates a handoff to:
• the handoff system type selected by the “CALL:SETup:SYSTem” command.
• the handoff frequency band selected by the “CALL:SETup:BAND” command.
• the handoff physical channel selected by the “CALL:SETup:CHANnel” command.
A handoff will occur within the current system if the current cell system type (see
“CALL[:CELL]:SYSTem” ) is the same as the current handoff system type (see
“CALL:SETup:SYSTem” ).
Programming Example
OUTPUT 714;"CALL:HANDOFF:IMMEDIATE" !initiates a handoff.
:HANDoffCALL
[:IMMediate]
To Next Page
Loading...
