Agilent Technologies 8960 Series Reference Guide

635
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_system_conf.fm
SYSTem:CONFigure:INFormation:HARDware:VERBose?
SYSTem:CONFigure:INFormation:HARDware:VERBose?
“Diagram Conventions”
SYSTem:CONFigure:INFormation:HARDware:VERBose?
Function Query the manufacturer, model number, model number of the test application running, serial
number, revision, board ID, and cal file information. The information provided by the query
represents the configuration that existed when the test set was powered up.
*RST Setting Resets have no effect on this information. The information is gathered during the power up cycle.
Related topics “Hardware Configuration Report”
Programming Example
OUTPUT 714;"SYSTEM:CONFIGURE:INFORMATION:HARDWARE:VERBOSE?" !Queries system hardware.
:INFormation :HARDware
SYSTem :CONFigure
:VERBose?

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English