94
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_gen_bse_pch.fm
Configuring the F-Paging Channel (F-PCH)
Configuring the F-Paging Channel (F-PCH)
The F-Paging channel parameters are configured using the following call processing subsystem functions and
commands.
Settable F-Paging Parameters
• F-Paging level.
• F-Paging state.
• F-Paging data rate.
• F-Paging IMSI type.
• F-Paging IMSI MCC (mobile country code).
• F-Paging IMSI MNC (mobile network code).
• F-Paging IMSI MSIN (mobile station identification number).
• F-Paging maximum slot cycle index.
Fixed F-Paging Parameters
The F-Paging Walsh code is fixed at code channel number 1.
GPIB Examples:
Setting the F-Paging state and level (complex command)
OUTPUT 714;"CALL:PAG -12 DB"
would set the F-Paging state on and set the level to −12 dB. See “CALL:PAGing[:SLEVel][:SELected]” .
Setting the F-Paging data rate
OUTPUT 714;"CALL:PAGING:DRATE HALF"
would set the F-Paging data rate to half-rate. See “CALL:PAGing:DRATe” .
To Next Page
Loading...
