To Next Page

To Previous Page

401

S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_sync.fm

CALL:SYNC

“Diagram Conventions” on page 248

CALL:SYNC[:SLEVel][:SELected]

Function The setting form of this command performs two functions: (1) sets the SYNC (synchronization

channel) level, and (2) turns the SYNC state to ON.

The query form of this command returns the SYNC level for the current system type.

The optional [:SELected] keyword in this command specifies that the SYNC level and state being

set/queried applies to the current system type. See “CALL[:CELL]:SYSTem[:TYPE]” to query or

change the current system type.

Setting Range: 0 to -20 dB

Resolution: 0.01 dB

Query Range: 0 to -20 dB

Resolution: 0.01 dB

*RST Setting -16 dB

Programming Example

OUTPUT 714;"CALL:SYNC:SLEVel -16"

!Sets the SYNC state to ON and sets the level to -16 dB.

<sp><num value>[DB]

? (returns num value)

:SYNC

<sp><num value>[DB]

[:SLEVel]

?(returns num value)

<sp>1|ON|0|OFF

:STATe

? (returns 1|0)

Complex Command

[:SELected]

:DIGital2000

:LEVel

CALL

[:SELected]

:DIGital2000

[:SELected]

:DIGital2000

:DIGital95

Agilent Technologies 8960 Series Reference Guide

Other manuals for Agilent Technologies 8960 Series