572
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_status_description.fm
STATus Subsystem
STATus Subsystem
Description
The STATus subsystem is used to communicate current test set status information to the controlling
application program.
Syntax Diagrams and Command Descriptions
Status Register Bit Definitions
“Status Byte Register Bit Assignments” on page 622
“Standard Event Status Register Bit Assignment” on page 624
“STATus:QUEStionable Condition Register Bit Assignment” on page 602
“STATus:QUEStionable:CALL Condition Register Bit Assignment” on page 603
“STATus:QUEStionable:ERRors Condition Register Bit Assignment” on page 607
“STATus:QUEStionable:HARDware Condition Register Bit Assignment” on page 621
“STATus:OPERation Register Bit Assignments” on page 579
“STATus:OPERation:CALL Condition Register Bit Assignment” on page 580
“STATus:OPERation:NMRReady Register Bit Assignments” on page 586
Related Topics
“Status Subsystem Overview” on page 197
“STATus:OPERation:” on page 573
“STATus:PRESet” on page 595
“STATus:QUEStionable” on page 596
“Status Byte Register” on page 622
“Standard Event Status Register” on page 623
To Next Page
Loading...
