Agilent Technologies 8960 Series Reference Guide

180
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_prog_swaudio.fm
Programming a Swept Audio Measurement
Returned Values
The results returned by this program are:
• Integrity returns the measurement integrity indicator (see “Integrity Indicator” on page 222); 0 means a
successful measurement with no errors.
• Lev1 through Lev5 return the audio level (voltage) at each of the five measurement points. In this example,
the value is returned in volts peak because the peak detector was specified.
• Dist1 through Dist5 return the distortion value at each of the five measurement points.
• Sinad1 through Sinad5 return the SINAD value at each of the five measurement points.
Related Topics
“Swept Audio Measurements Description” on page 65
“Swept Audio Measurement Troubleshooting” on page 715
“INITiate” on page 476
“SETup:SAUDio” on page 556
“FETCh:SAUDio” on page 458

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English