Agilent Technologies 8960 Series Reference Guide

367
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_schannel.fm
CALL:SCHannel
CALL:SCHannel
See “Diagram Conventions” on page 248
:SCHannel
CALL
<sp><num value>[DB]
[:SLEVel]
?(returns num value)
Complex Command
[:SELected]
:DIGital2000
<sp>BPS9600|BPS19200|BPS38400|BPS76800|BPS153600
CALL
:DRATe
:SCHannel
:RCONfig1
:RCONfig2
:RCONfig3
<sp>BPS9600|BPS19200|BPS38400|BPS76800|BPS153600|
:RCONfig4
BPS307200
:RCONfig5
<sp>BPS14400|BPS28800|BPS57600|BPS115200|BPS230400
<sp>BPS9600|BPS19200|BPS38400|BPS76800|BPS153600
<sp>BPS14400|BPS28800|BPS57600|BPS115200|BPS230400
?(returns string)
?(returns string)
?(returns string)
?(returns string)
?(returns string)
<sp>BPS9600|BPS14400|BPS19200|BPS28800|BPS38400|
[:SELected]
Note: Data rates used with the SELected keyword must be compatible with the currently selected radio
configuration. If a data rate that does not belong to the selected radio configuration’s rate set is used,
an error message will be generated.
BPS57600|BPS76800|BPS115200|BPS153600|
BPS230400|BPS307200
<sp>1|ON|0|OFF
:STATe
? (returns num value)
<sp><num value>[DB]
? (returns num value)
:LEVel
<sp>TURBo|CONVolution
? (returns TURB|CONV)
:ENCoder
[:SELected]
:DIGital2000
[:SELected]
:DIGital2000
:SCHannel
CALL

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English