381
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_sid.fm
CALL[:CELL]:SIDentity
CALL[:CELL]:SIDentity
“Diagram Conventions” on page 248
CALL[:CELL]:SIDentity
Function Sets/queries the system identification number. Use the CALL[:CELL]:SIDentity:CDMA
command when the current system type is DIG2000 or DIG95. Use the
CALL[:CELL]:SIDentity:AMPS command when the current system type is AMPS.
Setting Range: 0 to 32767
Query Range: 0 to 32767
*RST Setting 331
Programming Example
OUTPUT 714;"CALL:CELL:SIDENTITY 231" !Sets the system identifier to 231.
:SIDentityCALL
[:CELL]
<sp><num value>
? (returns num value)
[:SELected]
:CDMA
:AMPS
To Next Page
Loading...
