104
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_prog_call_registration.fm
Performing a Registration
Performing a Registration
Registering a Mobile Station
Registering a mobile station can be performed when the mobile station has found service with the test set’s
base station emulator in active cell operating mode. When a registration has completed, the Mobile Station
Information window will display the registration data received from the mobile station.
The test set has the capability to initiate two types of registrations. One is a zone-based registration, also
referred to as “forced” registration. The other type is timer-based registrations, a feature which provides a
setting for the time interval between registrations. See “CALL:REGister” on page 362.
Many mobile stations will also perform a registration upon being powered on. This usually only takes a few
seconds, and is currently not controlled by the test set.
Related Topics
“How Do I Change Cell Information?” on page 664
To Next Page
Loading...
Need help?
General
