34
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_meas_matrix.fm
Instrument Configuration Measurement Matrix
Instrument Configuration Measurement Matrix
The following table shows which measurements are available for the various instrument configurations.
Table 1.
Active Cell IS-2000 Test
AVC
Test
CW
Mode
Cell
Off
IS-2000
IS-95 AMPS RC3,
RC4,
RC5
RC1,
RC2
RC3,
RC4,
RC5
RC1,
RC2
Digital Average Power
XX XX
Channel Power
XX XX
Waveform Quality, Code Domain X
X
a
a. Code domain is not available in RC1, RC2, or IS-95, but it is displayed on the instrument’s display for these
configurations.
X
X
a.
Access Probe Power XX
Frame Error Rate XX
TDSO Frame Error Rate X
Handoff Waveform Quality X
Gated Power XX X
Time Response of Open Loop Power XX XX
Code Channel Time and Phase XX
TX Spurious Emissions XX XX
Analog TX Power XXX
Frequency Stability XXX
FM: deviation, distortion, frequency XXX
Audio
b
: level, SINAD, frequency,
distortion, swept audio
b. These are instrument selection measurements. They are supported in all states.
XX XXXXXX
To Next Page
Loading...
