Agilent Technologies 8960 Series Reference Guide

98
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_gen_bse_ocns.fm
Configuring the F-OCNS (Forward Orthogonal Channel Noise Simulator)
Configuring the F-OCNS (Forward Orthogonal Channel Noise
Simulator)
The F-OCNS channel parameters are configured using the following call processing subsystem functions and
commands.
Settable F-OCNS Parameters
• F-OCNS Walsh code.
Fixed F-OCNS Parameters
• F-OCNS level (calculated value based on summation of all other code channels)
• OCNS_CCI_SUPPORTED is fixed at 0.
• NUM_OCNS is fixed at 1.
• F-OCNS Walsh code is fixed at code channel number 80.
GPIB Examples:
Setting F-OCNS Walsh code
OUTPUT 714;"CALL:OCNSOURCE:WALSH CODE5"
would set the F-OCNS Walsh code to 10. See “CALL:OCNSource:WALSh[:SELected]” .
Querying F-OCNS level
OUTPUT 714;"CALL:OCNSOURCE:LEVEL?"
would query the last F-OCNS calculation. See “CALL:OCNSource:LEVel[:SELected]?” .
Operating Considerations
F-OCNS is a read-only value.
The F-OCNS value is calculated to provide a summing value that results in a total code channel value
equalling 100% of cell power. If the current desired code channel levels do not allow for a valid OCNS
calculation an error message will be displayed.
Related Topics
“CALL:OCNSource”
“How Do I Change Code Channel Levels?”

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English