633
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_system_application.fm
SYSTem:APPLication
SYSTem:APPLication:SELect:REVision ‘<test application name>’,’<revision>’
Related Topics
“Test Application Switching” on page 775
“Test Application Revisions and Licenses” on page 777
“Test Application Name” on page 779
“SYSTem:CURRent:TA” on page 645
Function Selects a test application revision and a test application.
The revision does not need to be set in order to switch test applications. The only time you select
revisions is to change revisions.
Queries the test set for the revision of a specified test application.
The test application name and revision must be entered as they appear in the test application
Setup menu, with the exception that the string is not case sensitive and can be entered in any
combination of upper and lower case letters.
NOTE GSM Mobile Test; revisions before A.04.00 did not have test application switching
and provide no way to return to revisions that have switching. Users will need to
reload a revision that has test application switching following the download
process for upgrading firmware.
Setting Range: A valid test application name and revision number for any licensed test application.
Query Range: A string up to 20 characters, or the null string.
Programming Example
OUTPUT 714;"SYSTEM:APPLICATION:SELECT:REVISION ‘CDMA 2000 MOBILE TEST’,’01011210’"
OUTPUT 714;"SYSTEM:APPLICATION:SELECT:REVISION? ’CDMA 2000 MOBILE TEST’"
To Next Page
Loading...
Need help?
General
