779
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_conf_name.fm
Test Application Name
Test Application Name
Description
The following queries give you details about the test application name. To query or switch test applications you
must use the test application name as it appears in the catalog (without regard to case).
• To query the name of the all test applications installed in the test set use this GPIB query.
OUTPUT 714;”SYSTEM:APPLICATION:CATALOG:NAME?”
• To query the name of the selected test application (running or not) use this GPIB query.
OUTPUT 714;”SYSTEM:APPLICATION:SELECT:NAME?”
• To query the name of the currently running test application use this GPIB query.
OUTPUT 714;”SYSTEM:APPLICATION:CURRENT:NAME?”
• To query the number of test applications installed in the test set use this GPIB query.
OUTPUT 714;”SYSTEM:APPLICATION:CATALOG:NAME:COUNT?”
The test application names can also be displayed in the Test Application Setup menu on the test set’s display.
Related Topics
“SYSTem:APPLication” on page 627
“Test Application Switching” on page 775
To Next Page
Loading...
