778
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_conf_rev.fm
Test Application Revisions and Licenses
Test Application License Status Query
The test application license status can be queried for a particular test application and revision using the
following GPIB query:
OUTPUT 714;”SYSTEM:APPLICATION:CATALOG:LICENSE? ‘GSM mobile test’,’A.04.01’”
This query returns one of the following:
•“LIC” - This revision of test application appears to have a LICense. The test application may have been
developed before licensing and therefore needs no license.
•“NLIC” - This test application does not appear to have a license. Selecting a Not LICensed revision will
result in an error +130.
•“PART” - Some PART of the test application does not appear to have a license.
•“UNKN” - This test application has UNKNown license status.
NOTE If you switch to a not licensed revision the test set will reboot to the SYSTEM CONFIG screen.
You will be unable to select any other screen or make any measurements. Query or view the Test
Application Setup menu to determine the licensed versions of test applications available.
Revision and license information can be viewed and selected from the SYSTEM CONFIG screen, by selecting
the Test Application Setup menu. Revisions are shown with their license status. After the revision number is a
letter. That letter indicates the revision license status; Licensed “L”, Not Licensed “N”, or Unknown “U”.
•“L”- This revision of test application appears to have a License. The test application may have been
developed before licensing and therefore needs no license.
•“N” - This test application does not appear to have a license. Selecting a Not licensed revision will result in
an error +130.
•“P” - Some Part of the test application does not appear to have a license.
•“U” - This test application has Unknown license status.
Related Topics
“Test Application Switching” on page 775
“SYSTem:APPLication” on page 627
To Next Page
Loading...
Need help?
General
