Agilent Technologies 8960 Series

303
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_mccode.fm
CALL[:CELL]:MCCode
CALL[:CELL]:MCCode
“Diagram Conventions” on page 248
CALL[:CELL]:MCCode
Function Sets/queries the mobile country code (MCC).
This parameter can be set any time and will be sent out in the next overhead message.
When escape mode is on (see “CALL[:CELL]:ESCape[:MODE]” command description), this
parameter is not used.
Setting Range: 0 to 999
Query Range: 0 to 999
*RST Setting 310
Programming Example
OUTPUT 714;"CALL:CELL:MCCODE 310" !Sets the mobile country code to 310.
:MCCodeCALL
[:CELL]
<sp><num value>
? (returns num value)