241
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_prog_sync_gen.fm
Test System Synchronization Overview
Test System Synchronization Overview
Description
Typical test systems include an external controller with a GPIB connection to the test set, an RF (and possible AF)
connection between the test set and a mobile station under test, and a serial connection between the mobile station and
the external controller.
Synchronizing an external controller with the test set and a mobile station under test ensures that no device does
something before it is supposed to, which can cause errors, or does something well after it could have, which wastes time.
To Next Page
Loading...
Need help?
General
