402
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_sync.fm
CALL:SYNC
CALL:SYNC:LEVel[:SELected]
CALL:SYNC:STATe[:SELected]
Function Sets/queries the forward SYNC (synchronization channel) level.
The optional [:SELected] keyword in this command specifies that the SYNC level being
set/queried applies to the current system type. See “CALL[:CELL]:SYSTem[:TYPE]” to query or
change the current system type.
Setting Range: 0 to -20 dB
Resolution: 0.01 dB
Query Range: 0 to -20 dB
Resolution: 0.01 dB
*RST Setting -16 dB
Programming Example
OUTPUT 714;"CALL:SYNC:LEVEL -16" !Set the SYNC channel level to -16 dB.
Function Sets/queries the SYNC (synchronization channel) state.
The optional [:SELected] keyword in this command specifies that the SYNC state being
set/queried applies to the current system type. See “CALL[:CELL]:SYSTem[:TYPE]” to query or
change the current system type.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting ON
Programming Example
OUTPUT 714;"CALL:SYNC:STATE OFF" !Turns off the SYNC channel.
To Next Page
Loading...
