Agilent Technologies 8960 Series - Page 271

271
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_aparameter.fm
CALL[:CELL]:APARameter
CALL[:CELL]:APARameter:PREamble
CALL[:CELL]:APARameter:SEQuence:REQuest[:MAXimum]
CALL[:CELL]:APARameter:SEQuence:RESPonse[:MAXimum]
Function Sets/queries the access parameters message preamble length. The access channel preamble
length is expressed in units of 20 millisecond frames.
Setting Range: 0 to 15
Resolution: integer
Query Range: 0 to 15
Resolution: integer
*RST Setting 10
Programming Example
OUTPUT 714;"CALL:CELL:APARAMETER:PREAMBLE 5"
!Sets the preamble size to 5.
Function Sets/queries the maximum number of access probes the mobile station will transmit per access
channel request.
Setting Range: 1 to 15
Resolution: integer
Query Range: 1 to 15
Resolution: integer
*RST Setting 1
Programming Example
OUTPUT 714;"CALL:CELL:APARAMETER:SEQUENCE:REQUEST:MAXIMUM 5"
!Sets the maximum number of access probes the mobile station will transmit per access channel
!request to 5.
Function Sets/queries the maximum number of access probes the mobile station will transmit per access
channel response.
Setting Range: 1 to 15
Resolution: integer
Query Range: 1 to 15
Resolution: integer
*RST Setting 1
Programming Example
OUTPUT 714;"CALL:CELL:APARAMETER:SEQUENCE:RESPONSE:MAXIMUM 5"
!Sets the maximum number of access probes the mobile station will transmit per access channel
!response to 5.