334
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_ms_reported_rst.fm
CALL:MS:REPorted:<RCON,REG,REV,SCIN,SCL,TXT>
CALL:MS:REPorted:REGistration[:TYPE]?
CALL:MS:REPorted:REVision:ANALog
CALL:MS:REPorted:SCINdex?
Function Queries the type of registration that was last received by the test set, as reported by the mobile
station.
Query Range:
ZONE|TIMER|POWERUP|POWERDOWN|PARAMETERCHANGE|ORDERED|DISTANCE
|USERZONE|CLEARED
*RST Setting CLEARED
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:REGISTRATION?”
Function Queries the analog mobile reported protocol version that the mobile station supports. Used only
in active cell operating mode.
Query Range: 0 to 3, 9.91E+37
Protocol Version:
0 (TIA/EIA-553/IS-54-A MS)
1 (TIA/EIA 627 dual-mode MS)
2 (IS-95 dual mode MS)
3 (TIA/EIA-136 dual-mode MS)
9.91E+37
*RST Setting 9.91 E+37
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:REVISION:ANALOG?”
Function Queries the mobile reported slot cycle index, as reported by the mobile station.
Query Range: 0 to 7, 9.91 E+37
*RST Setting 9.91 E+37
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:SCINDEX?”
To Next Page
Loading...
Need help?
General
