446
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_fetch_fm.fm
FETCh:FM
FETCh:FM:FREQuency:SDEViation?
FETCh:FM:ICOunt?
FETCh:FM:INTegrity?
Function Queries the standard deviation audio frequency.
Query Range: 0 to 99999 Hz, 9.91 E+37
Resolution: 0.01 Hz
Programming Example
OUTPUT 714;”FETCH:FM:FREQUENCY:SDEVIATION?”
Function Queries the intermediate count of measurements completed in a multi-measurement.
Query Range: 0 to 99
Programming Example
OUTPUT 714;”FETCH:FM:ICOUNT?”
Function Queries the measurement integrity indicator for the last FM measurement completed.
Zero indicates a normal measurement. See “Integrity Indicator” on page 222 for information
about non-zero integrity results.
Query Range: 1 through 16
Programming Example
OUTPUT 714;”INITiate:FM” !Start FM measurement.
OUTPUT 714;”FETCH:FM?” !Request measurement results.
ENTER 714;Integrity,Fm_dev_dist !Read measurement results.
IF Integrity = 0 THEN !If 0 then measurement was successful.
PRINT “FM =”;Fm_dev_dist !Measurement results printed if measurement is successful.
ELSE
PRINT “Measurement integrity questionable, integrity value = “;Integrity
END IF
END
To Next Page
Loading...
Need help?
General
