649
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_system_preset.fm
SYSTem:PRESet
SYSTem:PRESet3
Function Performs a partial preset. This is the recommended command for users when a partial preset
is needed during remote operation of the test set.
Any call in process is disconnected and all measurements are aborted and inactivated.
Measurement parameters are not changed.
A partial preset will not modify any measurement settings including trigger arm.
Related Topics
See “Partial Preset” for more details.
Programming Example
OUTPUT 714;"SYSTEM:PRESET3" !Partial preset when in remote operation.
To Next Page
Loading...
