721
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_log.fm
Error Message Log
Error Message Log
Description
When an error message is displayed, it is also logged in the error message log. This log is only accessible
manually; it is not available through GPIB. The error message log can be displayed by pressing the F7 menu
key from the SYSTEM CONFIG screen. Next Page and Previous Page controls are provided.
All errors and events that are generated are displayed in the error message log. When the log is full a new
message is sent to the log and the oldest message is removed from the log. The log is cleared when the test set
powers up or when you press F10 (Clear Error Message Log).
Related Topics
“Error Messages” on page 719
To Next Page
Loading...
Need help?
General
