Agilent Technologies Nano Indenter G200 User Manual

NanoSuite Explorer D
Agilent Nano Indenter G200 User’s Guide D-40
Figure D-49General tab for Inputs
The Display Name can be any combination of keyboard characters,
including spaces. You can change the display name as often as you
want.
The Units drop-down menu enables you to change the unit of
measurement for the selected unit class.
To modify the Units Class:
1 Click Units Class... to open the Units Selection dialog box. Select
the class from the Class drop-down menu.
This selection will determine the content for Type.
2 Select the type from the Type drop-down menu.
3 Click OK.
The Default Value parameter is either a drop-down menu or text box,
depending on the Choice List setting in the
"Options Tab" on
page D-42. Adjust the Default Value to set the default value for the
input.
If the Default Value is a drop-down menu, then select a value from the
menu. Add values to the drop-down list by clicking Edit… and adding
values via the Create Default Values List dialog box, shown in
Figure D-50 on page D-41.

Agilent Technologies Nano Indenter G200 Specifications

General

Brand	Agilent Technologies
Model	Nano Indenter G200
Category	Laboratory Equipment
Language	English