NanoSuite Explorer D
Agilent Nano Indenter G200 User’s Guide D-41
Figure D-50Create Default Values List dialog box
Select the number of decimal places to display by using the Decimal
Places drop-down menu. The choices are constrained to zero through 15
decimal places.
The Result checkbox determines whether an input is included (selected)
or excluded (cleared) from the Review page.
To specify whether a input is included or the order of inputs in the
Review page with other results:
1 Click Result Order... in Figure D-44 on page D-34 to open the
Order Results dialog box
2 Click Add > or < Remove to add or remove a input from the Results
list.
a Click Add All (>>) to add all inputs.
b Click Remove All (<<) to remove all inputs.
3 To change the order in which the inputs appear, select an input from
the Results list and use the Up and Down arrows on the right to
promote or demote an input within the list.
4 Click OK when finished.
Description Tab
Enter a description for a formula in the Description text box.
To Next Page
Loading...
Need help?
General
