Training Exercises G
Agilent Nano Indenter G200 User’s Guide G-7
15 In the User Configuration dialog box, click the Properties tab.
16 Select all of the checkboxes as shown in Figure G-6.
17 Click OK.
Figure G-6Properties tab in User Configuration dialog box
18 In the Users List dialog box, click OK.
19 Log out by selecting Logout from the User menu.
20 Log in as the new user by selecting Login… from the User menu.
21 At the User Login dialog box, select Joe from the Name drop-down
menu.
22 Enter NanoMan in the Password text box as shown in Figure G-7 on
page G-8.
23 Click OK.
Note that the desired method is automatically loaded.
To Next Page
Loading...
Need help?
General
