Quick Start Guide 2
Agilent Nano Indenter G200 User’s Guide 2-43
Reviewing Data from the First Batch
You have just completed the first batch in which you performed a series
of four tests on fused silica. Now, review the results.
1 Click the Review tab, shown in Figure 2-58.
Figure 2-58Review tab
2 In the left panel, right-click and select Select All Tests from the
pop-up menu, as shown in
Figure 2-59.
Figure 2-59Select all Tests on right-click menu
The Review Graph area displays the results from all four tests.
3 In the left panel, right-click and select Deselect All Tests from the
pop-up menu.
4 In the Legend panel, select the 1 check box next to the first test (as
shown in
Figure 2-60 on page 2-44) so that the Review Graph will
display only results from that test.
To Next Page
Loading...
