AT-GS900M Series CLI Reference
Section II: Switch Management 159
Example
The following example displays the SNTP configuration and SNTP
counters:
Manager > show ntp
Last Delta Displays the offset that the system time was
adjusted the last time.
Configured Peer Displays the IP address of the SNTP peer.
NTP Server Listen Port Displays the IP address of the UDP port for SNTP
server.
Packets Sent Displays the number of transmitted SNTP packets.
Packets Received Displays the number of received SNTP packets.
Packets w/ head error Displays the number of received SNTP packets that
include a head error.
Packets w/ data error Displays the number of received SNTP packets that
include a data error.
Table 19. SHOW NTP Command (Continued)
Field Description
To Next Page
Loading...
Need help?
General
